Wireless Video Extender
Extend high-definition (HD) video and audio in a wired or wireless configuration from one source to one or more destinations. The Emerge MPX1000 multipoint extender provides true digital picture and sound content delivery to displays for network or wireless hd video presentation and digital signage applications.
Wireless Video - HDMI / DVI / VGA / Component
The Avocent Emerge MPX1000 HD multipoint extender provides wired or wireless video connectivity for moving high-definition content from one source to one or more destinations incorporating High-Definition Multimedia Interface (HDMI) technology. High resolution computer graphics, high-definition video, stereo audio, and control data are wirelessly transmitted to as many as eight wireless or LAN connected receivers.
Wireless HD Digital Signage
The MPX1000 HD multipoint extender includes a transmitter and receiver that provide high-definition wireless digital media support for use in professional audio-visual applications. Audio-video synchronization is maintained at each display and all wirelessly connected receivers remain in lock step with each other. Additional interchangeable modules are available for input/output of analog signals including composite video, component video, computer graphics; or digital HDMI/DVI signals.
Specifications
| MPX1000T: Transmitter Mechanical / Power / Environmental | |
|---|---|
| Size | 7.54" (192 mm) D, 17.0" (431 mm) W, 1.7" (43 mm) H |
| Weight | 5.5 lbs. (2.5 Kg) with full A/V module |
| Power (AC input/frequency) | 100 -240 VAC / 50 - 60 Hz |
| Inrush Current | .91 Amps |
| AC Power Usage | 17.5W |
| DC Power Usage | 12W |
| BTU | 40.956 BTU/Hr |
| Operating Temperature | 32F (0C) to 118.4F (48C) |
| Storage Temperature | -4F (-20C) to 140F (60C) |
| Humidity | 20% to 80% (Non-condensing) |
| MPX1000T/MPX1500R: Transmitter / Receiver Connections (Front) | |
| IR Receiver | IR input |
| 3.5 Mini | IR Blaster output, 38KHz +/- 1KHz ; the IR Blaster port supports enough drive current to handle 4 IR LEDs |
| SMA Connector (2) | Antenna |
| MPX1000T/MPX1500R: Transmitter / Receiver Connections (Rear) | |
| L1 (RJ-45) | Ethernet 10/100 IEEE 802.3, used for local network control of device |
| L2 (RJ-45) | Ethernet 10/100 IEEE 802.3, used for streaming video |
| RS-232 (Female) | Serial control input (Tx, Rx, CTS, and DTS) |
| Power | IEC |
| Input Module | Input module slot |
| Radio | Protocol: IEEE 802.11a; UNII 1 (4 channels) band: 5.15-5.25 GHz, and UNII 3 (4 channels) band: 5.725-5.825 GHz; 2.4 GHz ISM Band (11 channels) |
| MPX1000MT-HDMI: Transmitter HDMI Input Module | |
| Connections | |
| RCA Female (2) | Unbalanced audio input |
| HDMI | Digital audio/video control |
| Video | |
| HDMI A/V Module | A/V input port supports 720 x 480p, 720p, 800 x 600 at 60 Hz, 640 x 480 at 60 Hz, and 1024 x 768 at 60 Hz |
| Audio | |
| Line Audio Inputs | Less than or equal to 10K Ohm with 0-36dB of headroom (Sensitivity) |
| Frequency response | The analog audio frequency response: 20 Hz - 20 Khz with a 3dB per octave roll-off beginning at 14 Khz |
| MPX1000MT-HD15: Transmitter VGA Input Module | |
| Connections | |
| RCA Female (2) | Unbalanced audio input |
| HDMI | Digital audio/video control |
| Video | |
| HDMI A/V Module | A/V input port supports 720 x 480p, 720p, 800 x 600 at 60 Hz, 640 x 480 at 60 Hz, and 1024 x 768 at 60 Hz |
| Audio | |
| Line Audio Inputs | Less than or equal to 10K Ohm with 0-36dB of headroom (Sensitivity) |
| Frequency response | The analog audio frequency response: 20 Hz - 20 Khz with a 3dB per octave roll-off beginning at 14 Khz |
| MPX1500R: Receiver Mechanical / Power/ Environmental | |
| Size | 4.55" (166 mm) D, 6.92" (176 mm) W, 1.00" (25.4 mm) H |
| Weight | 1.4 lbs. (0.64 Kg) |
| Power (AC input/frequency) | 100 - 240 VAC / 50 - 60 Hz |
| Operating Temperature | 32F (0C) to 118.4F (48C) |
| Storage Temperature | -4F (-20C) to 140F (60C) |
| Humidity | 20% to 80% (Non-condensing) |
| MPX1500R: Audio | |
| Line Audio Inputs: | Less than or equal to 10K Ohm with 0-36db of headroom (Sensitivity) |
| Line Audio Outputs: | 600 Ohm with internal resistance of 150 Ohm |
| Frequency Response: | The analog audio frequency response: 20Hz - 20KHz with a 3dB per octave roll-off beginning at 14KHz |
| MPX1500R: Radio Bands | |
| UNII 1: (4 channels) | 5.15-5.25 GHz |
| UNII 3: (4 channels) | 5.725 to 5.825 GHz |
| ISM (11 channels) | 2.412 to 2.462 GHz (supported in USA only) |
| MPX1500R: Digital A/V Output Port (Supports the following HDMI and DVI-D resolutions) | |
| Computer resolutions (at 30 frames per second): |
|
| MPX1500R: Analog A/V Output Port (Supports the following VGA resolutions) | |
| Computer resolutions (at 30 frames per second): |
|
| Antennas | |
| Two 2dB omni-directional (included) / 8dB directional antennas (optional) / 2 G-Band antennas | |
| Extension Distances | |
| Wired Distance: Wired distance limitations conform to Ethernet standards for a single subnet (no routing). Wireless Distance: 150 ft (45 m) wirelessly through walls; up to 1,000 ft (304 m) line-of-sight with optional directional antenna | |
| Standards | |
| FCC Class B, UL, cUL, RoHS, CE, ICES-003, WEEE | |
| Warranty | |
| Two Years | |
Ordering
| Description | Part Number | |
|---|---|---|
| Emerge MPX1000 HD Multipoint Extender - Transmitter | MPX1000T | |
| Emerge MPX1500R HDD Multipoint Extender - Receiver | MPX1500R | |
| Emerge MPX1000 HDMI Transmitter Module | MPX1000MT-HDMI | |
| Emerge MPX1000 VGA Transmitter Module | MPX1000MT-HD15 | |
| Emerge HGA51G-DIR30 Directional Antenna - Optional 8dB / High Gain 5.1 GHz Antennas (includes two) | HGA51G-DIR30 | |
| 5G-1M Antenna Extension Kit, 1 Meter Cable | 5G-1M | |
| 5G-2M Antenna Extension Kit, 2 Meter Cable | 5G-2M | |
| 5G-3M Antenna Extension Kit, 3 Meter Cable | 5G-3M | |
| Antenna Kit - 5.5GHZ +2DB Omni Reverse-SMA 136MM Length | LGA55G-OMN | |
| Intermediate Gain (3dB) 2.4 2.5 GHZ Omni-Directional Antenna | IGA24G-OMN | |
| Low Gain (1.46dB) 2.4 2.5 GHZ Omni-Directional Antenna | LGA24G-OMN | |
| Accessories | ||
| Accessories | Part Number | |
| Table / Desk Mount Bracket | RMK-56 | |
| Optional Power Supply Bracket for MPX1500R | PBK-01 | |
| Wall Mount Kit for MPX1500R | DMK-04 | |
| Female Adapter Cable for Component Video for MPX1000T | HD15-BNC3 | |
| Male to Male 1 Meter Cable for MPX1000T | HDMI-1M | |
| DVI-D (Male) to HDMI (Female) Adapter for MPX1000T | DVI-HDMI | |
| Adapter for HDMI with CEC for MPX1500R | DVI-HDMI/CEC | |
| Dual DB-9 Female Serial Cable for MPX1500R | DB9-DUAL | |
| Adapter for Component Video for MPX1500R | DVI-BNC3 | |
| IR Blaster - Dual Splitter for MPX1500R/MPX1000T | IRB-Y | |
| IR Blaster for MPX1500R/MPX1000T | IRB-100 | |
| IR Receiver - 2.5mm Connector for MPX1500R | IR-RX | |
This product range replaces the EWMS1000. The LV3500 and LV4500 will never be available in Australia
FAQS
We get a lot of 'can I buy one for my telly' enquiries for this product.
While we agree its a great idea and we would be happy to sell you one you should please be aware it is commercial grade equipment and the cost of a typical config for the system is in the 3000-5000 range - it is not generally cost effective for home use.
Would you like to talk to us about your requirements and how our products will work for you? Please CLICK TO ENQUIRE NOW